We buildwhat youdraw. Custom architectural mild steel fabrication in Bengaluru.
Custom architectural fabrication in mild steel. From drawings and ideas to finished metalwork.
SHS 40 × 40 × 2 mm
Steel is our raw material. Architecture is the result.
LOHA works with architects, designers, builders and homeowners to turn concepts, drawings and dimensions into precise custom metalwork.
We fabricate primarily in mild steel, made specifically for the space it goes into. Our focus is simple: build it accurately, build it well.
What webuild
10 categories / MSCustom MS gates designed around the architecture: swing, sliding or telescopic.
- SHS frame, flat or pipe infill
- Automation ready
- 3000 to 6000 mm wide
Balcony, staircase and terrace railings fabricated to site levels.
- Top or side fixed
- Flat, rod, mesh or plate infill
- H 1000 to 1200 mm
Custom mild-steel staircases fabricated from architectural drawings and site dimensions.
- Mono or twin stringer, spiral
- Chequered or wood-clad treads
- Rise and going to code
Security grills drawn to sit with the facade, not against it.
- Window, door, shaft and duct
- Fixed or openable
- Pattern to your drawing
Decorative and architectural screens, laser cut or fabricated.
- Jaali, perforated, bar patterns
- Privacy and shading
- Panelised for installation
Structural outdoor frames for terraces, gardens and courtyards.
- Slat, louvre or glass roof
- Column and beam sizing
- Anchor and base plates
Cantilevered and supported canopies for entrances and drop-offs.
- Polycarbonate, glass, sheet
- Tie-rod or moment frame
- Integrated drainage
Fins, frames and cladding sub-structures for building faces.
- Vertical fins, louvres
- Secondary steel frames
- Shop drawings on request
Steel-framed partitions for offices, homes and hospitality.
- Glass, mesh or panel infill
- Doors integrated
- Slim 25 mm sightlines
If you can draw it, we can evaluate it. Brackets, furniture frames, signage structures.
- From sketch or CAD
- Prototype then batch
- Bespoke finishes
From drawingto fabrication.
Every job starts on paper. We read your drawing, or draft one from your sketch and site measurements.
| Stringer ISMC 150 | 2 × 3940 |
| Tread, chequered plate 5 mm | 12 × 1000 |
| Post SHS 40 × 40 × 2 | 6 × 1050 |
| Handrail pipe Ø48 | 1 × 4900 |
| Rail pipe Ø25 | 2 × 4900 |
Selectedwork.
Projects / 007






From ideato installation.
Tell us what you need
Tell us what you want to build, where it goes, and roughly when.
Send your drawing
PDF, CAD, image, sketch or reference photo. Anything that shows intent.
We review
We check dimensions, material requirements and fabrication complexity.
Quote
You receive a quotation based on the information available, with clear assumptions.
Fabrication
Once approved, we prepare shop drawings and start fabrication in our workshop.
Delivery or installation
The finished work is delivered or installed by our team, depending on the project.
Mildsteel.
Mild steel is strong, versatile and easy to cut, weld and shape. That makes it the right base for metalwork drawn for one specific space.
- StructuralCarries stairs, canopies and gates without bulky sections.
- VersatileHollow sections, flats, plates, angles and pipes in one system.
- FabricableCuts clean and welds reliably in the workshop and on site.
- CustomizablePrimed, painted or powder coated to match the architecture.
Stainless steel and aluminium on request. Mild steel is our primary material.
- Custom
Every piece is fabricated for the place it goes into.
- Precise
We work from drawings, dimensions and site measurements.
- Direct
One team from quotation to fabrication to installation.
- Built to last
Mild steel, fabricated and finished for real-world use.
Have aproject?
Send us the drawing.
Upload your drawing, PDF, sketch or reference photo and tell us what you need fabricated. It takes about two minutes.
Have adrawing?
Let's build it.